Perm-A-Barrier VPL Low Temperature (LT) Membrane

Perm-A-Barrier VPL Low Temperature (LT) Membrane

Perm-A-Barrier VPL Low Temp (LT) is a fluid-applied, vapor-permeable air barrier membrane for low temperature applications. Perm-A-Barrier VPL Low Temp (LT) is a two-component, acrylic membrane that cures to form a resilient, monolithic, fully-bonded elastomeric sheet when applied to construction surfaces at temperatures between 20 °F (-7°C) and rising to 60 °F (16°C).

SKU: 536cb7cf5128 Category:

Description

Perm-A-Barrier VPL LT membrane provides superior protection against the damaging effects of air and liquid water ingress on building structures. The product creates a solid barrier against air infiltration and exfiltration, which minimizes associated energy loss and condensation problems.Perm-A-Barrier VPL LT membrane is vapor permeable for wall assemblies requiring this “breathable” characteristic. As a vapor permeable membrane, this product permits the transfusion of water vapor that may otherwise condense in the wall structure; but is impermeable to liquid water, which allows the material to act as a water drainage plane.Product Advantages

  • Fire resistant – meets NFPA 285 as part of various wall assemblies with foam plastic insulation
  • Plasticizer, Phthalate and Halogen-free – safe and environmentally-friendly
  • Air tight – protects against air passage and associated energy losses. Meets new ASTM E2357 standard as required by IECC 2012
  • Vapor permeable – prevents moisture from being trapped in the wall cavity by allowing walls the ability to dry
  • Low Temperature – can be applied at temperatures as lo as 20°F (-7°C)
  • Fully bonded – transmits wind loads directly to the substrate
  • Seamless – continuous membrane integrity with no laps
  • Damp surface tolerant – can be applied to damp-to-touch surfaces
  • Strong adhesion to common construction substrates such as wood, block, concrete, OSB, gypsum sheathing and metal
  • Compatible with Perm-A-Barrier® Flashing Systems

Principal Applications Vapor permeable air barrier for new and remedial commercial and residential applications where application temperatures are between 20 °F (-7 °C) and 60 °F (16 °C):

  • Concrete block walls with brick veneer or pre-formed cladding panels
  • Steel or wood stud walls with exterior gypsum sheathing, brick veneer or pre-formed panels, plywood and OSB

General Insulation Company is a leading national distributor of insulation, building materials, and specialty construction solutions serving residential, commercial, industrial, mechanical, and marine markets. With an extensive distribution network, custom fabrication capabilities, technical expertise, and dedicated project support, we help contractors and businesses source the right materials and keep projects moving.

[tp widget="subswidget"]