ELASTOLAR Sealant may meet requirements for LEED 2009 IEQ 4.1 Low-Emitting Materials, Adhesives and Sealants for some applications where the use falls under the ‘Other’ category. Refer to LEED guides for more information. VOC: 384 g/l, less water (336 g/l, less water cartridge grade)

COLOR:
Aluminum

APPLICATION CONSISTENCY:
Trowel, caulking gun or power extrusion equipment

AVERAGE WEIGHT/U.S. GALLON (ASTM D1475):
9.3 lbs. (1.12 kg/l) ”“ Pail
9.5 lbs. (1.14 kg/l) ”“ Cartridge

AVERAGE NON-VOLATILE (ASTM D2369):
52 to 58% by volume (65% by weight) ”“ Pail
59 to 62% by volume (72% by weight) ”“ Cartridge

COVERAGE RANGE:
Trowel: 12 to 25 sq. ft./gal. (0.29 to 0.61 m2/l)
1/8 to 1/16 in. (3.2 to 1.6 mm) wet film thickness
Cartridge gun: 125 linear ft. per 10.5 fluid oz. tube,
1/8 in. bead. (38 m per 0.31 l tube, 3.2 mm bead)
30 linear ft. per 10.5 fluid oz. tube, 1/4 in. bead
(9 m per 0.31 l tube, 6.4 mm bead)

DRYING TIME:
To Touch: 1/2 Hour
Through: 72 Hours

SERVICE TEMPERATURE LIMITS:
Temperature at coated surface.
Joint Sealant ”“ Urethane Foam
-150°F to 200°F (-101°C to 93°C)
Joint Sealant ”“ Cellular Glass
-100°F to 250°F (-73°C to 121°C)
Flashing Compound and Jacketing Laps (temperature at flashed surface)
-67°F to 250°F (-55°C to 121°C)

WET FLAMMABILITY (ASTM D3278):
Flash Point: 105°F (41°C)

SURFACE BURNING CHARACTERISTICS (ASTM E84):
Flame Spread: 15
Smoke Developed: 0
Tested at coverage rate of 25 sq. ft./gal. (0.61 m2/l) in 2 in. (5 cm) strip. Applied to 1/4 inch (6.4 mm) inorganic reinforced cement board. The flame spread may vary at different product thicknesses and/or when applied over other surfaces.