Description

ELASTOLAR Sealant may meet requirements for LEED 2009 IEQ 4.1 Low-Emitting Materials, Adhesives and Sealants for some applications where the use falls under the ‘Other’ category. Refer to LEED guides for more information. VOC: 384 g/l, less water (336 g/l, less water cartridge grade)COLOR:AluminumAPPLICATION CONSISTENCY:Trowel, caulking gun or power extrusion equipmentAVERAGE WEIGHT/U.S. GALLON (ASTM D1475):9.3 lbs. (1.12 kg/l) – Pail9.5 lbs. (1.14 kg/l) – CartridgeAVERAGE NON-VOLATILE (ASTM D2369):52 to 58% by volume (65% by weight) – Pail59 to 62% by volume (72% by weight) – CartridgeCOVERAGE RANGE:Trowel: 12 to 25 sq. ft./gal. (0.29 to 0.61 m2/l)1/8 to 1/16 in. (3.2 to 1.6 mm) wet film thicknessCartridge gun: 125 linear ft. per 10.5 fluid oz. tube,1/8 in. bead. (38 m per 0.31 l tube, 3.2 mm bead)30 linear ft. per 10.5 fluid oz. tube, 1/4 in. bead(9 m per 0.31 l tube, 6.4 mm bead)DRYING TIME:To Touch: 1/2 HourThrough: 72 HoursSERVICE TEMPERATURE LIMITS:Temperature at coated surface.Joint Sealant – Urethane Foam-150°F to 200°F (-101°C to 93°C)Joint Sealant – Cellular Glass-100°F to 250°F (-73°C to 121°C)Flashing Compound and Jacketing Laps (temperature at flashed surface)-67°F to 250°F (-55°C to 121°C)WET FLAMMABILITY (ASTM D3278):Flash Point: 105°F (41°C)SURFACE BURNING CHARACTERISTICS (ASTM E84):Flame Spread: 15Smoke Developed: 0Tested at coverage rate of 25 sq. ft./gal. (0.61 m2/l) in 2 in. (5 cm) strip. Applied to 1/4 inch (6.4 mm) inorganic reinforced cement board. The flame spread may vary at different product thicknesses and/or when applied over other surfaces.

 General Insulation Company Inc. is an insulation supplier / insulation distributor that stocks and fabricates a wide variety of industrial and commercial air barrier, vapor barrier, moisture and water barrier products for the construction market.