SPARK-FAS® ADHESIVE is a quick-setting, non-flammable, fire-resistive, synthetic elastomer adhesive used to adhere duct wrap, fibrous glass or mineral wool insulations
SPARK-FAS® ADHESIVE gives superior service when it is used as a contact adhesive to cement the laps of aluminum foil, FSK, ASJ and FRK facings. Meets ASTM C916, Type I (ASC-A 7001, Type I) requirements, MIL-A-3316C, Class 2, Grade A test requirements, NFPA 90A and 90B 25/50 requirements. SPARK-FAS® ADHESIVE is produced under the classification and follow-up service of Underwriter’s Laboratories, Inc
VOC Emissions and Content requirements to contribute to LEED v4 EQ Credit: Low Emitting Materials – Paints and Coatings VOC Content: 162 g/l, less water and exempt solvents.
AVERAGE WEIGHT / U.S. GALLON (ASTM D1475):10.8 lbs. (1.29 kg/l)AVERAGE NON-VOLATILE (ASTM D2369):44% by weightFOR LAP SEALING: 75 sq. ft./gal. (1.8 m2/l) 0.021 in. wet film thickness (0.5 mm). Averages 500 linear feet (152 meters) of 2 in. (5 cm) wide band of adhesiveSERVICE TEMPERATURE LIMITS:Temperature at coated surface.-20°F to 180°F (-29°C to 82°C)WET FLAMMABILITY:No flash to boiling: 98°F (37°C)SURFACE BURNING CHARACTERISTICS (ASTM E84):Flame Spread: 15Smoke Developed: 0
Get More Info
General Insulation Company Inc. is an insulation supplier / insulation distributor that stocks and fabricates a wide variety of industrial and commercial air barrier, vapor barrier, moisture and water barrier products for the construction market.
